Regarding anti-fog bathroom mirrors, chemical anti-fog agent coatings are generally used, and the effect is time-limited. Mirror anti-fogging is the same as car glass defogging, which requires wind blowing. The real anti-fogging mirror has a heating device behind it, so that the mirror has heat to evaporate the water vapor. If it is an ordinary mirror, use a harder soap dipped in water to wipe the surface of the mirror, and then wipe it with a dry rag to form a protective film, which can also play a temporary anti-fog effect.
If you want to look beautiful, you must have good lighting, and the lights on the front of the mirror or the side of the mirror are very necessary.
When installing, you can use expansion bolts. When drilling, pay attention to the variety of tiles. If it is all-ceramic, use rhinestones and hit them little by little. Otherwise, it is very easy to crack. If you use glass glue to fix, do not use acid glass glue, you should choose neutral glue, acid glass glue will usually react with the material on the back of the mirror, causing mottled mirror surface. Before applying the glue, it is best to do a compatibility test to see if the glue is compatible with the material. It is best to use a special mirror glue.
In the bathroom, you usually stand and look in the mirror. The bottom edge of the bathroom mirror should be at least 135 cm from the ground. If the height difference between family members is relatively large, you can adjust it up and down. Try to make your face in the middle of the mirror, so the imaging effect is better. It is best to choose a frameless style, because the bathroom is often in a wet state, and frame materials such as wood and leather are easy to change over time.